Blog | Anders Automotive

What You Should Know About the Dangers of Potholes

Wed, 23 Oct 2019 17:47:00 GMT

If you’ve driven in Kansas City for a while, you’ve seen one – a pit in the middle of the road that seems like it could swallow your car whole. But potholes are more than an inconvenience. They can be dangerous, and they can cause significant damage to your car. Learn more about where potholes come from and how to avoid – or fix – the damages they create.

Where do Potholes Come From?

The answer to the question of “What is a pothole?” might seem obvious. It’s just a hole in the road, right? But the answer to the question of where they come from is a bit more complicated.

The process to create a pothole is pretty simple and has just a few steps:

Over many cycles of freezing and thawing, a pothole that started as a tiny crack can grow into a huge pit in the road . Cars and trucks also make potholes form faster. The wear they cause as they drive over the same piece of road can force the cracks apart and make the pothole form faster.

Once the road starts to crack, a pothole will eventually form. The only way to prevent a pothole from forming, or to fix one that has already formed, is to fill the cracks so water cannot get inside.

What Makes Potholes Dangerous?

Of course, a hole in the road isn’t that dangerous by itself. But the problem with potholes is that most drivers don’t expect them . When you hit one, it almost always comes as a surprise, and surprises while driving are usually bad. Many drivers will panic when they hit a pothole and either slam on their brakes or swerve unexpectedly. This can cause more serious accidents if you aren’t careful.

Of course, potholes can also damage your car on their own . If you do hit a pothole while driving, you could see many types of damage, such as:

Some of these types of damage are easy to spot. However, other kinds, such as damage to your tires or wheel alignment, can be harder to notice. If you recently hit a pothole, keep an eye out for any of these symptoms of pothole damage :

Avoiding the Dangers of Potholes

The best strategy for dealing with potholes is to avoid them as much as possible . However, sometimes you will have to drive down a rough stretch of road. You should know how to prevent and avoid damage due to potholes as much as possible.

Go Slow

If you are on a street with a lot of potholes, the best thing you can do is slow down . Smaller potholes won’t cause damage when you drive through them slowly, and large ones are easier to spot and avoid when you aren’t moving fast.

Keep Moving Straight

When you have to drive through a pothole, it’s best to face it head-on . Turning your wheel while you’re in a pothole can cause damage to your tires, wheels, and suspension. Slow down and drive straight through until you’re over it completely.

Don’t Swerve

Sometimes you have time to see a pothole coming up, but not a lot of time to react. In these cases, it’s best not to swerve suddenly . When you swerve, you could cause a bigger accident than the one you’re trying to avoid. It’s always best to stay in control of your vehicle.

Get Professional Help

If you think a pothole may have caused damage to your car, don’t wait to get it checked . Bring your vehicle in to Anders Automotive to make sure there isn’t hidden damage putting you at risk.

Pothole Damage Repair in Kansas City

If your car is showing signs of damage after hitting a pothole in Kansas City, don’t ignore it. Contact us today at Anders Automotive. We can help get you back on the road and ensure your car is working right.

Mysterious Flat Tire? Here’s What it Could Be.

Wed, 23 Oct 2019 17:07:00 GMT

The most common cause of a flat tire is a puncture. Sometimes you know what hit your tire, sometimes you don’t. However, sometimes you can search for holes, find one, and yet your tire is still going flat over time.

What can cause this kind of flat tire mystery?

A Faulty Valve Stem

The valve stem is the thing you unscrew to inflate your tire. The valve stem can easily become damaged or corroded. It could also be loose or even simply clogged with dirt. One of the first things to check is that the valve stem is screwing on correctly. Sometimes you can fix this yourself, especially if it’s a clog. However, in most cases, you should go to a mechanic to have the valve stem checked and, if necessary, replaced. New tires generally come with new valve stems, so this is more likely to be a problem if you have not needed new tires in a while.

The Tire is Poorly Seated

This often happens if you pop the curb or rub a wheel against something when parking. You probably won’t notice any damage right away, but will see a mysterious slow leak. A qualified mechanic can easily re-seat your tire, but don’t try to fix this yourself, as you’re likely to make the problem worse.

A Leaky Tire Bead

Along the same lines, sometimes the leak is in the edge of the tire that rests on the rim. These leaks aren’t easily found in a visual inspection. Spraying your wheel and valve system with soapy water can help reveal a leak, which will show up as a stream of small bubbles. Make sure that you do this when the tire is fully inflated. This will save time when you take the car to the shop as you can tell the mechanic where the leak is.

Wheel Corrosion

Sometimes the problem is not your tire, it’s your wheel. The mounting surface of the wheel can become corroded. It can also be dented, which often happens if you hit a pothole or drive down a rough gravel driveway. Alloy rims are also known for being porous , which can be fixed by patching with gasket sealer. This is definitely not something you should attempt yourself. A mechanic will be able to tell you if the wheel can be fixed or if it needs to be replaced.

Overall Tire Wear

Sometimes there is not a specific hole, but rather an area where the tire has worn thin from overall wear. Generally, this means it is time (or past time) for new tires. Uneven tire wear, caused by poor tracking or balance, can make this much more likely.

Temperature Changes

Hot air expands, cold air shrinks. This includes the air inside your tires. This means that hot weather, especially if driving for a while, increases your risk of a blowout. Cold weather can cause the pressure in your tires to drop below safe levels. If there’s a cold snap, you may need to add a bit of air to your tires. In some cases, the low pressure warning will go away after you drive for a few miles and heat up your tires, but you should still check your tire pressure. This is one thing you can probably handle yourself. However, if in doubt, or if you suspect a leak, call a mechanic. Tire problems are more likely to develop in winter when cold rubber is less flexible.

A flat tire can be caused by a variety of factors, not all of which are visible to a simple inspection. Instead, you should check your tire pressure with a gauge about once a month and contact your mechanic if you suspect you have a leak. If you think you may have a leak in one or more tires, contact Anders Automotive to make an appointment today.

Important Car Maintenance Tips for Uber Drivers

Wed, 18 Sep 2019 20:54:00 GMT

As an Uber driver, you spend more time in your vehicle than the average driver. Not only that, you may see wear and tear on your vehicle that other drivers simply don’t see. With these basic car maintenance tips, however, you can increase your vehicle’s lifespan and prevent yourself from missing costly problems with your vehicle.

#1: Check Your Owner’s Manual for a Car Maintenance Schedule

Many manufacturers have a very specific car maintenance schedule, from checking the fluids to doing a full engine flush. As an Uber driver, it’s vital that you pay attention to these key reminders. When you take care of your vehicle, it will continue functioning well in spite of all those extra miles you put on it.

Make sure you check your owner’s manual for a full understanding of exactly when you need to take care of those important tasks. If you get short on cash, talk with a qualified mechanic to help you better understand how to fit those important maintenance tasks into your schedule.

#2: Examine Your Car Before Driving

If you’re headed out as an Uber driver for the evening, you expect to spend quite a bit of time on the road–and the last thing you want is to end up broken down. Instead, take the time to look over and examine your car before driving.

Conducting regular checks is a great car maintenance practice. Ideally, you want to conduct a full check at least once per week–more if you’re driving in bad weather conditions. You can also do a basic inspection of your car as you’re filling it up with gas. Make sure that you:

#3: Put Oil Changes on Your Calendar

You know that your car’s oil needs to be changed every 3,000-5,000 miles, depending on the manufacturer’s recommendations. As an Uber driver, you can cover that distance in the blink of an eye. As you develop a better idea of how many miles you drive on a regular basis, go ahead and schedule those oil changes ahead of time.

This will ensure that your car has the clean supply of oil that it needs to keep running at peak efficiency–and that you don’t accidentally forget to schedule an oil change. You should also change the oil filter with each oil change and take a look at your air filter each time you change the oil.

#4: Don’t Ignore Problems

One of the great things about being an Uber driver is that you will probably get to know your car pretty well. If it starts making strange noises or behaving differently, you’ll know that there’s something going on–and you’ll notice immediately if it continues to worsen. Don’t ignore those potential signs of problems! Instead, seek car maintenance and repair as soon as you suspect a problem. Describe the exact problem to the mechanic and have them look it over.

If necessary, you may take them on a test drive with you so you can show them exactly how the problem occurs. In many cases, taking your vehicle in during the early signs of mechanical problems can prevent more serious issues down the road.

Do you need regular car maintenance as an Uber driver in Kansas City? We can help! Contact us today to schedule important maintenance on your vehicle.

Puddle in Your Driveway? Could it be Coolant?

Thu, 18 Jul 2019 03:34:00 GMT

One of the major signs that there might be something wrong with your car is a puddle in your driveway or garage right under where you normally park it. There are a number of things which can leak from your car, of which the two most common are coolant fluid and water.

Identifying Your Leak

The easiest way to identify your leak is by smell and color. If it smells like gasoline, it’s…gasoline. If the puddle is at the back, it’s your tank. But if it’s at the front, it’s your fuel pump. Either way, get a mechanic quickly. Otherwise, look at the color:

Your mechanic may be able to tell you what color some of these things are for your specific car when you have it in for a service.

Coolant Leak

A coolant leak is one of the most common. It’s not the most serious leak, but you should get it fixed for two main reasons:

So, what should you do if you have a coolant leak? First of all, you have two primary causes that could be behind it. The easiest to fix is a leaky radiator cap. This can sometimes be caused by attempting to DIY a radiator problem and fixing the cap incorrectly or, worse, using the wrong one. Other sources of leaks can be split or broken hoses, a hole in the radiator, a leaking pump, heater core, or freeze plugs. Often you can actually spot the problem visually. The coolant reservoir may also be cracked.

What Should You Do Next?

These are not problems the average person can fix themselves. Your car’s cooling system is important for its health. One thing you can do yourself is top up the coolant reservoir, but this should be an interim measure until you can get your car to a good mechanic in Kansas City like Anders Automotive to get the leak looked at. The solution might be anything from a new radiator cap to a completely new radiator, but anything is better than being that poor person at the side of the road waiting for the tow truck. With newer cars, coolant problems may be covered by your warranty, so it’s always worth checking.

If your car has a coolant leak (or one of the other leaks mentioned), you want to get it fixed by a competent mechanic as soon as possible. Many of these issues will only become worse if they aren’t fixed. If you suspect a coolant leak, then contact Anders Automotive today to make an appointment to get it checked out.

Anders Automotive Provides Common Signs of Suspension Problems

Mon, 01 Jul 2019 16:31:00 GMT

Suspension problems are common after accidents (even ones with no other visible damage) or wear and tear. They are particularly common if you are dealing with snow, excessive numbers of potholes, driving across railroad tracks, etc. Suspension problems can become expensive or dangerous very quickly, so if you see any of these symptoms, you should call a mechanic right away before the damage gets worse:

1. Your car is pulling to one side.

On a straight, level road, if you drop the wheel your car should keep going in a straight line. This is not always a suspension problem. It can also be caused by poor alignment, uneven tire pressure or brake issues. Check your tires for wear. If your tire pressure checks out and you still experience pulling, then you should get your alignment and suspension checked.

This could also indicate an issue with the steering rack. You might also find that replacing the front tires solves the problem if you are dealing with excessive wear. Avoid driving for an extended period with an underinflated tire as it will cause wear and shorten the life of your tires.

2. The ride has become rougher.

Your suspension system is supposed to smooth out the bumps in the road for you. If you are feeling every single bump, it is not doing that job. One way to check is the bounce test. Lean on the hood with your entire weight, release, and count how many times the car bounces. It should not be bouncing more than three times. Excessive bouncing is generally caused by a worn shock absorber or a worn leaf spring in trucks.

3. Diving, rolling, or squatting.

Diving means leaning forward when you brake, squatting is leaning backward when you accelerate and rolling is moving from side to side when cornering. If you notice this is happening, again, try the bounce test. These things can happen if you are really pushing your car, but not during normal driving.

4. Sitting low in one corner.

If one corner of your car is lower than the others, you probably have a damaged spring. You might be able to hear it if that wheel hits a bump or a pothole. Like pulling to the side this can also be caused by uneven tire inflation, so check that first. Then try the trunk test. Lean your entire weight on the trunk and listen. Any creaking or squealing indicates a spring problem.

Check right away and don’t wait until your car is practically touching the highway. Don’t forget that trucks are actually supposed to sit a little bit nose down when the back is empty, to allow for weight. If your truck is level, you may have a worn leaf spring.

5. Oil or fluid on your shock absorbers.

When shock absorbers leak they tend not to create a puddle, but you may see obvious grease or oil on the outside of the shock absorber or strut. You should do a visual check at regular intervals – check with your dealer or mechanic for best practices for your vehicle.

6. Difficulty steering, especially at low speeds.

This could also indicate a problem with your power steering system. Either way, you should get your car checked right away. Not being able to steer properly is extremely dangerous. Your mechanic will check for power steering problems, which can include low fluid levels, a worn belt, a faulty pump, a leaking rack or worn control arm bushings. Often your car will feel like it is slipping when you turn the wheel.

Suspension problems can rapidly become problems controlling the vehicle and can also cause damage to your tires and even the body of your car, so they should be checked quickly. Most suspension problems are not a DIY fix and you should contact a mechanic right away. If you need help with your suspension in Kansas City, then contact Anders Automotive today .

Replacing Tires? You Need to do them in Pairs, and Here is Why

Tue, 04 Jun 2019 15:00:00 GMT

When it comes to replacing tires, you will be told you “need” to replace your tires in pairs, rather than one at the time. Why is this, and is it really necessary?

In fact, in some narrow cases, you can replace only one tire , but this is generally only when the rest of your tires are fairly new. Most of the time, you should replace your tires in pairs. On some AWD vehicles, the manufacturer may even recommend replacing all four tires.

Reasons to Replace All Four Tires

In most cases, you can buy only two tires not four. Always check with AWD vehicles as some systems can develop problems if there is a significant wear difference front to rear. However, your new tires should be of the same make and model as the ones already on the car, which means if those tires are no longer available for whatever reason you should replace all four.

Front tires wear out faster than rear ones on modern front wheel drive vehicles. You should ignore logic and intuition: The new tires should go on the back of the car and the worn but still good tires from the rear on the front. This is because when your rear tires are worn more than your front tires, you can experience oversteer in wet conditions. This can lead to a spin.

Rotating Your Tires

An even better practice is to rotate your tires according to the manufacturer’s recommendations. This will cause your tires to wear more evenly. This does mean you will probably have to replace all four, but you will have to do it less often. Some tire manufacturers require to you rotate your tires or you may void your warranty. If in doubt, talk to a tire specialist .

In fact, most manufacturers do recommend a complete set of tires. However, this is obviously more costly. Ultimately, it’s worth running the numbers to see if the cost of tire rotation (generally low) will result in enough savings in the long run to make it worth doing. Also, remember that after replacing tires your vehicle should be properly aligned to ensure that it will handle properly. Another thing that can sometimes save money is to have the new tire shaved. This means that the tread is reduced to match the other tire. While this will shorten the life of the tire and generally means it will need to be replaced at the same time as the others, it can be a good option if you want to replace one tire because, for example, the tire was damaged or slashed.

Also, make sure that your tires are always properly inflated to reduce wear and improve both handling and gas mileage. Don’t rely on the tire-pressure monitoring system, as it only cuts in when your tire is already significantly flat.

Replacing tires is an important part of keeping your car on the road and your family safe. While there are ways to save money, the best course of action is not to scrimp on new tires and keep the manufacturer’s recommendations in mind. If you are looking for new tires, contact Anders Automotive today.

A Pre-Road Trip Checkup for Your Car

Wed, 08 May 2019 15:00:00 GMT

Are you headed out on a road trip this summer? Before you leave, make sure your car is road ready with a pre-road trip checkup! You need your car to safely reach your destination, so make sure you take care of these key pieces of maintenance before you set out.

1. Check All of Your Fluids

Your car needs a lot of fluids to run effectively. Low fluids can cause your engine to overheat or your brakes to fail. They may interfere with your power steering or simply leave you unable to clean your windshield as it gets dirty throughout the course of your trip. Before you leave, make sure you check :

2. Schedule Your Oil Change

Check the little sticker in your window: are you getting close to time for an oil change, either in terms of the miles you’ve driven or the length of time from your last oil change? If so, go ahead and schedule your oil change before your road trip. It might not be the most convenient thing you’ve done recently, but it will ensure that you don’t have any mechanical problems when you set out on your trip.

3. Replace Your Tires if Needed

Nothing puts a damper on a road trip faster than a flat tire that leaves you stranded on the side of the road. In a best-case scenario, you’re probably going to be stuck for a couple of hours while you wait for a tow truck or a tire replacement. Instead, go ahead and take care of your tires before you head off on your trip. If the tread is looking worn or you have any suspicions of a leak, it’s time to replace your tires–and you want to do it before your road trip, not after. Even if the treads look great, check the air pressure in your tires before you head out. Make sure that it’s set to the recommended level. If it’s been a while since you last rotated your tires, right before your road trip is a great time to take care of that, too.

4. Have Your Car Checked Out

In addition to basic maintenance, take your car in for a checkup before you head off on your road trip. The more miles you need to cover, the more important it is that your car gets you there safely–and a car that needs some basic repairs may leave you stranded in the middle of your trip. Take your car in to a mechanic to check for:

5. Do Your Own Check

You know your vehicle better than anyone else: the little noises it makes, the way it drives, the way it steers. Before you head out on your road trip, do a test run on a local highway. If you notice anything unusual, including shaking, strange sounds, or problems with the way it handles, take it in and let your mechanic know about the problem so that you can take care of any repairs now, not while you’re out on vacation.

Are you getting ready to head out on a road trip this summer? Don’t let your car let you down! Instead, contact us today to schedule a pre-road trip checkup and get your car running as smoothly as possible so that when you head out on your trip, you have a higher level of assurance that you’re going to reach your destination as well as a smoother, more comfortable ride.

Does running the A/C in your car use additional fuel?

Mon, 08 Apr 2019 16:28:00 GMT

When temperatures rise, people tend to turn on the air conditioning in their vehicle. Of course, there are some people that have concerns about how their AC usage will impact their mileage. Does running the AC in your car use additional fuel? You can find the answer to this common question below.

Running The AC Will Lower Your Vehicle’s Fuel Efficiency

If you keep the AC running while you drive, you can expect the fuel efficiency of your vehicle to be lowered by approximately three miles per gallon. While the total impact will vary based on the car you’re driving , you can always expect your fuel efficiency to be decreased.

If you’re keeping your AC running all the time, you’re going to be using more gas. You may want to limit the amount of driving that you do during the summer because of this. If you’re prepared for the extra gas usage, you’ll be able to lower your total expense.

When Your AC Is Running, Energy Is Diverted From The Engine

You might be curious about why your car uses extra fuel when the AC is on. This happens because energy is diverted from the engine to the air conditioner when it’s running. This leads to more fuel usage overall.

Your car has to get the energy needed to keep your AC running from somewhere. As the old saying goes, nothing in life is free.

If you want a cool, air-conditioned car, you’re going to have to use some of your gas to get that. Most people will agree that it’s worth using a little bit of gas to stay cool.

Rolling Your Windows Down Might Not Be The Better Option

When people realize that their air conditioner is using gas, they often decide to roll their windows down instead. It’s easy to understand the logic behind this decision, but in many cases, it isn’t actually a good idea.

When your windows are lowered, wind rushes into your vehicle. This creates a drag force that makes it harder to power your car. This also leads your vehicle to consume more fuel overall. It’s likely that you’ll burn less fuel when the AC is on.

If you’re driving at slow speeds, however, then rolling down the windows might be a feasible solution. Generally, you should avoid rolling your windows down if you’re traveling at speeds above 40 miles an hour.

You Should Keep Your Car Cool And Comfortable

You might think that you can withstand the heat if it means that you can spend less on gas. This is fine if the weather is only slightly warm, but when temperatures are scorching hot, this can actually be dangerous.

High temperatures can make it more difficult for you to properly breathe. They can lead to overheating, which can cause adverse health symptoms. Beyond that, being in a hot car can make you drowsy, which could cause you to fall asleep at the wheel.

Even if you want to limit what you spend on gas, you need to be sure you’re driving in a safe environment. If it’s very hot outside, then the smartest thing that you can do is turn the AC on when you drive. You might be using more gas, but you’ll also be driving in a safe environment.

Yes, running your air conditioner is going to use some fuel. That said, you won’t necessarily want to keep your AC unit turned off.

You need to consider your own unique situation when you’re making decisions about what you should or shouldn’t do with your car. Look at the weather forecast, think about the speeds you’re traveling at, and decide what to do from there.

Conventional Motor Oil Vs. Synthetic Oil

Tue, 05 Mar 2019 02:27:00 GMT

Choosing the best oil for your vehicle demands research and the ability to plan ahead.

With so many options entering the automotive industry, it’s become important to focus on the details while making sure an intelligent decision is made as soon as it’s required.

Here is a look at a comparison between conventional motor oil and synthetic oil.

What is Conventional Motor Oil?

Conventional motor oil is a basic refined oil, which is used to regulate performance and manage an engine’s quality. It can be found in various forms but often doesn’t have the same baseline of additives compared to synthetic blends.

Benefits of Conventional Motor Oil

1) Price-Efficient

There is only one benefit associated with conventional motor oil and that has to do with price-efficiency. In general, this is a basic refined oil, which means it doesn’t have the level of advancement as noticed in synthetic blends. As a result, it is easier for providers to price conventional motor oil at a lower price in comparison to its competitors.

What is Synthetic Oil?

Benefits of Synthetic Oil

1) Improved Fuel Economy

There are many benefits associated with synthetic oil but one of them has to do with improving fuel economy. No one wants a situation where the fuel economy starts to ruin their vehicle and wallet at the same time. This is where high-grade synthetic oil can make a tangible difference. It’s one of the best options for those looking to optimize their fuel consumption by improving how well the engine runs. Good synthetic oil is able to offer this type of value as soon as it is put to use.

2) Reduced Emissions

Emissions have always been an issue in modern society and a lot of work has been done to make sure that is not the case. One of the changes seen in the industry has to do with synthetic oil and how it interacts with the vehicle. It is able to reduce the emissions significantly and this has to do with the additives in its formulation.

The additives ensure the oil is able to help the engine at all times.

3) All-Weather Protection

In many places around the world, the weather conditions tend to fluctuate and that means it’s important to use the right type of oil. Synthetic oil responds well to these changes and can keep the engine running in prime condition even as the weather changes from month to month. This alone is useful in colder climates where snow is a real problem.

4) Longer Intervals for Oil Changes

Oil changes can be expensive and synthetic oil is renowned for elongating the period between changes. This keeps things simple and ensures a person doesn’t have to keep spending money on oil changes all the time. Instead, you are able to see improved value in how well the vehicle performs and it’s going to remain consistent at the same time.

Final Thoughts

You are easily able to rotate between oil types if that’s what you are looking to do. However, synthetic oils are well-established as a new and improved option due to how refined they are compared to conventional alternatives. For anyone looking to make sure their vehicle is in good shape, it’s best to start with the help of high-quality synthetic oil.

How Long Does Transmission Service Take?

Mon, 11 Feb 2019 23:10:00 GMT

Check Engine Light Reasons – A Quick & Handy Guide

Thu, 24 Jan 2019 05:19:00 GMT

If you aren’t a mechanic, and you don’t know much about cars, then you might start to stress when the check engine light comes on. However, it doesn’t mean you need to freak out, or that the car will explode if you drive another mile! The light is definitely drawing your attention to something and it’s better to have it looked at sooner rather than later.

To give you some idea of what could be causing the problem, here are some common check engine light reasons that we tend to see all the time.

It Can Be The O2 Sensor

The purpose of the O2 sensor is to measure the oxygen inside the engine that has yet to burn. But if the sensor isn’t functioning properly, it will lead to two different things. Firstly, the check engine light will most likely come on. Secondly, the car begins to use more fuel than it is supposed to.

If it happens to be the sensor that is malfunctioning, it could damage other parts of the car like the spark plugs or catalytic converter. You can learn more about the O2 sensor here: The O2 Sensor and how it works .

Loose/Missing Gas Cap

Yes, something as basic as a gas cap can make the engine light jump to life. Now, the cap can either be missing, loose or damaged in some way. The result is fuel getting lost through evaporation, and the pressure inside the gas tank won’t be what it should.

This is not a major problem, but you will be wasting a lot of fuel if you don’t address the issue. Also, don’t forget to put the gas cap back on after you’re finished at the pump!

The Catalytic Converter Is Faulty

The purpose of the catalytic converter is to convert harmful carbon monoxide into carbon dioxide. If this process isn’t happening properly, it could trigger the check engine light. This usually happens due to a lack of regular automotive maintenance in general.

As for not getting the problem fixed – you are bound to experience a less than impressive performance and fuel efficiency from the car. This is of course something you should address as soon as you can.

Spark Plugs And Wires

Spark plugs and the proper plug wires are essential for maintaining a smooth ride. In fact, just one missing plug is enough to make the best car run like a messed up piece of junk. No one wants to have someone ride in their car with weird feelings or noises.

So, if the check engine light comes on and it’s been a while since the plugs and wires have been changed, now might be the right time to do it. Of course, these are just some of the check engine light reasons, but they are definitely common.

What if the Check Engine Light Is Flashing?

We’ve recorded a simple video to help explain what to do if your check engine light is flashing. In a nutshell, you should not drive it, or drive it to your nearest auto repair shop .

If you need help with your ride, come down to Anders Automotive. We’re trusted auto mechanics in Kansas City and we’re here to help you take care of all of your vehicle woes. Thank you for reading and stay tuned for more from our blog.